Answering system
Base message counter displays
The base message counter shows the total number of answering system
messages. See the following table for other message counter displays.
Message counter displays
0
No messages.
0
(flashing)
You need to set the clock (page 13).
1-99
Total number of old messages and memos, or message
number currently playing during old message playback.
1-99
(flashing)
Total number of messages and memos. The number
flashes when there are new or missed messages.
After a power failure, the number in the message counter
flashes to indicate that you need to set the clock.
1-99 & F
(alternating)
Memory is full. You must delete some messages before
recording new messages.
- -
The system is answering a call, recording a message or
memo, or is being reached remotely.
The telephone line is in use.
0-6
Shows for two seconds while adjusting the telephone
base ringer volume.
1-8
Shows for two seconds while adjusting the telephone
base speaker volume.
70
To Next Page
Loading...
Need help?
General
