Smart call blocker
95
Call block settings
Record your name for all screening announcements:
1. Press CALL BLOCK on the handset when it is not in use.
-OR-
Press MENU/SELECT to enter the main menu when the handset
is not in use. Press qCID or pDIR to scroll to Smart call blk, then
press MENU/SELECT.
2. Press qCID or pDIR to scroll to Screening annc, then press
MENU/SELECT.
3. Press MENU/SELECT to select Rec your name. The system
announces, “Record after the tone. Press 5 when you are done.”
4. Speak towards the handset to record your name. Press 5 to end
recording.
To listen to the announcement with your recorded name again,
scroll to Play annc and press MENU/SELECT.
Reset all your screening announcements:
1. Press CALL BLOCK on the handset when it is not in use.
-OR-
Press MENU/SELECT to enter the main menu when the handset
is not in use. Press qCID or pDIR to scroll to Smart call blk, then
press MENU/SELECT.
2. Press qCID or pDIR to scroll to Screening annc,
then press MENU/SELECT.
3. Press qCID or pDIR to scroll to Reset annc, then
press MENU/SELECT. The screen shows Reset
to default annc?. Press MENU/SELECT again
Annc. reset to
default before returning to the previous menu.
-OR-
While an announcement is playing, press
MUTE/DELETE. The screen shows Annc. Deleted
before returning to the previous menu.
Your name will be deleted from all the screening announcements,
and the telephone will use the default screening announcements
described on page 93.
Uncatergorized
>Screening annc
Play annc
>Reset annc
To Next Page
Loading...
Need help?
General
