Multiple handset use
42
Multiple handset use
Handset locator
The handset locator feature is useful if
you misplace any handsets.
To start the paging tone:
f Press
FIND HS on the telephone
base to start the paging tone on all
handsets for 60 seconds.
Note: If you press or
MUTE/DELETE on a handset, the ringer of that
handset stops, but the paging to the rest of the
handsets continues.
To stop the paging tone:
f Press , /SPEAKER,
or any dialing key (0-9, TONE or #)
on the handset(s).
-OR-
f Press
FIND HS on the telephone
base.
Join a call in progress
When a handset is already on a call and you would like to join the
call, press or /SPEAKER on your handset.
To end the call using a handset, press or place the
handset in the telephone base or charger. The call does not end
until all handsets hang up.
Notes:
f If you have registered a cordless headset or cordless speakerphone to the telephone base, you can
also join a call in progress using the registered device. Refer to the user’s manuals of your cordless
headset or speakerphone for more information.
f You can use up to four system handsets at the same time on an outside call.
42
**Paging**
To Next Page
Loading...
