18
Getting started
1. Plug the telephone line into the telephone base. If you are using
wall-mount bracket hole.
2. Align the holes on the wall-mount bracket with the standard
wall plate and slide the wall-mount bracket down until it locks
securely.
3. Position the telephone base, as shown below. Insert the
extended tabs (marked B) of the wall-mount bracket into the
slots on the back of the telephone base. Push the telephone
base down until it is securely in place.
4. Plug the power adapter into a power outlet not controlled by
a wall switch. Plug the other end of the power adapter into
the telephone base. Bundle the telephone line cord and power
adapter cord neatly with twist ties.
Installation options
Your telephone base is ready for tabletop use. If you want to mount
your telephone on a wall, follow the steps to connect the telephone
base with a standard dual-stud telephone wall-mounting plate. You
may need a professional to install the mounting plate.
Tabletop to wall-mount installation
A
1
2
3
4
To Next Page
Loading...
Need help?
General
