AT&T CL82319 - Call block settings

Smart call blocker
77
Call block settings
Set Smart call blocker on/o
The Smart call blocker feature is set to on by default.
1. Press CALL BLOCK on the handset when it is
not in use, and then press MENU/SELECT to
select SCB On/Off.
-OR-
Press MENU/SELECT to enter the main menu
when the handset is not in use. Press qCID or
pDIR to scroll to Smart call blk, then press
MENU/SELECT twice.
2. Press qCID or pDIR to highlight On or Off,
then press MENU/SELECT to save the setting.
You hear a confirmation tone.
Note: If you set SCB On/O to O, all settings under Set prole
(see below) will be invalid.
Set prole

you to quickly set up Smart call blocker.
1. Press CALL BLOCK in idle mode.
-OR-
Press MENU/SELECT to enter the main menu when
the handset is not in use. Press qCID or pDIR to
scroll to Smart call blk, then press MENU/SELECT.
2. Press qCID or pDIR to scroll to Set profile, then
press MENU/SELECT.
3. Press qCID or pDIR to select one of the following
options, then press MENU/SELECT.
f Screen unknown - screen any calls without numbers or with
numbers not saved in the Directory, Allow list, or Star name list.
 
the callers to say their names before putting the calls through to you. See
Screen unknown calls on page 98.

Star name list
>Set profile

>Screen unknown
Screen robot

Answering sys
>Smart call blk

>SCB On/Off
Block list