Multiple handset use
47
Push-to-talk (PTT)
PTT call to a single device
1. There are a few ways to begin a PTT call to a
single device. When the handset is not in use:
f If you have a two-handset system,
press and hold PTT.
f If you have more than two handsets:
w Press PTT on the handset, then use the
dialing keys to enter the destination device
number.
-OR-
w Press PTT on the handset. Press qCID or
pDIR to highlight the destination device
number, then press MENU/SELECT or PTT.
The handset shows Connecting to HANDSET
X...
(HANDSET represents the handset name,
X represents the destination handset number).
When the
connection is made, both your and the destination device
screens display
Press and hold [PTT] to talk.
2. Press and hold PTT. A chirp indicates your
microphone is on. Speak towards the device. Your
voice is broadcast to the destination device.
While you are speaking, your handset shows
PTT To handset: X.
3. Release PTT after speaking. Both devices beep once again and
the screens show Press and hold [PTT] to talk, then you can
press and hold PTT to continue speaking or the destination
device can respond (see Answer a PTT call on page 49).
4. To end the PTT call, press or place the handset in
the telephone base or charger. The handset shows
Push to talk Ended.
PUSH TO TALK
>HANDSET X
Connecting to
HANDSET X...
Press and hold
[PTT] to talk
PTT To
handset: X
To Next Page
Loading...
