Answering system
106
Answering system settings
To record a new outgoing announcement:
Using a cordless handset or the telephone base:
1. When the telephone is in idle mode, press MENU/SELECT to
enter the main menu.
2. Press CID or DIR to scroll to Answering sys, then press
MENU/SELECT.
3. Press MENU/SELECT again to select Announcement.
4. Press MENU/SELECT to select Record annc. The system
announces, “Record after the tone. Press 5 when you are
done.”
5. Speak towards the handset or the telephone base to
record your announcement. Press 5 to end recording.
Your recorded announcement plays.
To listen to the recorded announcement again, scroll to
Play annc and press MENU/SELECT.
>Record annc
Play annc
>Record annc
Play annc
>Announcement
Delete all old
>Announcement
Delete all old
To Next Page
Loading...
