AT&T CL84307 - Rename Handset; Key Tone

25
Telephone settings
Rename handset
The default handset name is HANDSET. You can create your own handset
name for each system handset.
1. When the handset is idle, press MENU/SELECT.
2. Press CID or DIR to scroll to Settings, then press
MENU/SELECT.
3. Press CID or DIR to scroll to Rename handset, then
press MENU/SELECT.
4. Change the handset name when prompted.
 Use the dialing keys and the chart on page 60 to enter
a name (up to 11 characters). Press a key repeatedly until
the desired character appears on the screen.
 Press CID or DIR to move the cursor to the le or right.
 Press MUTE/DELETE to backspace and delete a character.
 Press and hold MUTE/DELETE to delete all characters.
5. Press MENU/SELECT to save the setting and return to the previous menu.
There is a conrmation tone.
Key tone
The handset is set to beep with each key press. You can adjust the key tone
volume or turn it o. If you turn o the key tone, there are no beeps when
you press keys.
1. Press MENU/SELECT in idle mode to enter the main menu.
2. Press CID or DIR to scroll to Settings, then press
MENU/SELECT.
3. Press CID or DIR to scroll to Key tone, then press
MENU/SELECT.
4. Press CID or DIR to select the desired volume or O.
5. Press MENU/SELECT to save your preference. There is
a conrmation tone and the screen returns to the
previous menu.
Handset settings
Clr voicemail
> Rename handset
RENAME HANDSET
HANDSET____
Rename handset
> Key tone
KEY TONE