AT&T CL84307 - Mute; Chain Dialing

Telephone operation
44
Options while on calls
Mute
Use the mute function to turn o the microphone. You
can hear the caller, but the caller cannot hear you.
To mute a call:
 While on a call, press MUTE/DELETE on the handset
or the telephone base. When mute is on, the handset
or telephone base shows Muted for a few seconds.
The MUTE icon displays on the handset screen or the
MUTE/DELETE button lights up on the base until you
turn it o.
To end mute a call:
 Press MUTE/DELETE again. When mute is o,
Microphone ON appears temporarily on the
handset or telephone base.
Chain dialing
Use this feature to initiate a dialing sequence from the numbers in the
directory, caller ID log or redial memory while you are on a call.
Chain dialing is useful when you wish to access other numbers (such as
bank account numbers or access codes) from the directory, caller ID log or
redial list.
Using a cordless handset:
To access the directory while on a call:
1. Press MENU/SELECT.
2. Press CID or DIR to scroll to Directory and then press
MENU/SELECT.
3. Press CID or DIR to scroll to the desired number.
4. Press MENU/SELECT to dial the number shown.
To access the caller ID log while on a call:
1. Press MENU/SELECT.
2. Press CID or DIR to scroll to Caller ID log, then press
MENU/SELECT.
3. Press CID or DIR to scroll to the desired number.
4. Press MENU/SELECT to dial the number shown.
To access the redial list while on a call:
1. Press REDIAL/PAUSE to show the most recently dialed
number.
2. Press CID or DIR to scroll to the desired number, or press
REDIAL/PAUSE repeatedly to find the desired number. Then,
press MENU/SELECT to dial the number shown.
REDIAL #1/10
800-360-4121
Phone 0:01:20
Charlie Johnson
6:30
AM
8/06
888-883-2445
Charlie Johnson
>Directory
Intercom