AT&T CL84307 - Answer a PTT Call; Change a One-To-One PTT Call to an Intercom Call

Multiple handset use
56
Push-to-talk (PTT)
Answer a PTT call
You can respond to a PTT call, as described below.
1. When your device receives a PTT call, it beeps and shows Press and hold
[PTT] to talk.
2. When the other party is speaking, your speakerphone light is on, and your
device shows:
 PTT From HS X To HS X (the first X represents the initiating handset
number, and the second X represents your handset number; a
maximum of four handset numbers appear).
-OR-
 PTT From HS X To Base (X represents the initiating handset number)
or PTT From HS X To Base & HS X (the first X represents the initiating
handset number, and the second X represents your handset number; a
maximum of four handset numbers appear).
-OR-
 PTT From Base To HS X (the X represents your handset number; a
maximum of five handset numbers appear).
3. When your speakerphone light is o (the screen shows Press and hold
[PTT] to talk), press and hold PUSH TO TALK on your handset or
FLASH/PTT on your telephone base. You will hear a chirp. Speak towards
the device.
 While you are speaking, your device shows PTT To Base, PTT To
Handset: X (X represents the handset numbers of one or more
destination handsets; a maximum of five handset numbers appear), or
PTT To Base & Handset: X (X represents the handset numbers of one
or more destination handsets; a maximum of four handset numbers
appear).
 Your voice is broadcast to all destination devices.
Aer speaking, release PUSH TO TALK on your handset or FLASH/PTT
on your telephone base. Your device will beep. Aer the beep, if your
speakerphone light is o, you can press and hold PUSH TO TALK on your
handset or FLASH/PTT on your telephone base to continue speaking, or
the destination device can respond.
Change a one-to-one PTT call to an intercom call
You can convert a one-to-one PTT session to an intercom call.
1. When your device shows Press and hold [PTT] to talk, press MENU/SELECT.
The screen shows Intercom.
2. Press MENU/SELECT. Your device displays Calling base, Calling BASE 0
or Calling HANDSET X. The destination device briey shows Push to
talk Ended and then HANDSET is calling, HANDSET X is calling, Base is
calling or BASE 0 is calling. The destination device rings.