AT&T CLP99286 - Page 113

107
Call block
Call block
Add a call block entry
Using the telephone base:
When the telephone is not in use, press MENU.
Press qCALLER ID or pDIRECTORY to scroll to Call block,
then press SELECT.
Press SELECT again to choose Block list.
Press qCALLER ID or pDIRECTORY to scroll to
Add new entry, then press SELECT.
When the screen displays ENTER NUMBER, use the
dialing keys to enter a number (up to 30 digits).
Press qCALLER ID or pDIRECTORY to move the cursor
to the left or right.
Press X/DELETE or BAC�SP to erase a digit.
Press and hold X/DELETE to erase all digits.
Press and hold REDIAL/PAUSE to enter a three-
second dialing pause (a p appears).
-OR-
Copy a number from the redial list by pressing REDIAL/PAUSE. Then, press
qCALLER ID or pDIRECTORY, or press REDIAL/PAUSE repeatedly to find the
desired number. Press SELECT to copy the number.
6. Press NEXT to move on to the name.
The display shows Number already saved if the number is already in
the call block list. You cannot save the same number twice.
7. When the screen displays ENTER NAME, use the dialing keys to enter
a name (up to 15 characters). Press a key repeatedly until the desired
character appears. The first character of every word is capitalized.
Press qCALLER ID or pDIRECTORY to move the cursor to the left or right.
Press 0 to add a space.
Press X/DELETE or BAC�SP to erase a character.
Press and hold X/DELETE to erase all characters.
Press TONE to change the next letter to upper or lower case.
8. Press SAVE to store your call block entry.
1.
2.
3.
4.
5.
•
•
•
•
•
•
•
•
•
•
Directory
Caller ID log
Intercom
Call block
p
q
SELECT
BACK
CALL BLOCK
Block list
Calls w/o num
p
q
SELECT
BACK
BLOCK LIST
Review
Add new entry
p
q
SELECT
BACK