AT&T CLP99286 - Options During Playback

Answering system
129
Message playback
Options during playback
When a message is playing, you can adjust the playback volume, skip, repeat,
pause or delete the message.
When messages are playing on the telephone base:
Press q/VOLUME/p to adjust the message playback volume.
Press /S�IP or S�IP to skip to the next message.
Press /REPEAT or REPEAT to repeat the message.
Press /REPEAT or REPEAT twice to hear the previous message.
Press X/DELETE to delete the message.
Press 2 to pause the playback and show the caller ID information.
Press HOME or CALL to use the home line, or press CELL 1 or CELL 2
to use the cell line to call back the caller. If necessary, press # (pound
key) or 1 to show different dialing options.
Press CANCEL or BAC� to restart the playback. If you do not call back
within 10 seconds, message playback restarts.
Press /PLAY/STOP or CANCEL to stop the playback.
When messages are playing on the handset:
Press

CID/VOLUME or

DIR/VOLUME to adjust the message
playback volume.
Press S�IP to skip to the next message.
Press REPEAT to repeat the message. Press REPEAT twice to listen to the
previous message.
Press MUTE/DELETE to delete the message.
Press 2 to pause the playback and show the caller ID information.
Press HOME/FLASH, CALL or /SPEA�ER to use the home line, or
press CELL 1 or CELL 2 to use the cell line to call back the caller. If
necessary, press # (pound key) or 1 to show different dialing options.
Press OFF/CLEAR or BAC� to restart the playback. If you do not call
back within 10 seconds, message playback restarts.
Press OFF/CLEAR to stop the playback.
•
•
•
•
•
•
–
–
•
•
•
•
•
•
–
–
•