106
Call block
Call block
Add a call block entry
Using the handset:
When the telephone is not in use, press MENU.
Press
CID or
DIR to scroll to Call block, then
press SELECT.
Press SELECT again to choose Block list.
Press
CID or
DIR to scroll to Add new entry, then
press SELECT.
When the screen displays Enter number, use the dialing
keys to enter a number (up to 30 digits).
Press
CID or
DIR to move the cursor to the left or right.
Press MUTE/DELETE or BAC�SP to erase a digit.
Press and hold MUTE/DELETE to erase all digits.
Press and hold REDIAL/PAUSE to enter a three-second
dialing pause (a p appears).
-OR-
Copy a number from the redial list by pressing
REDIAL/PAUSE. Then, press
CID,
DIR, or press
REDIAL/PAUSE repeatedly to find the desired number.
Press SELECT to copy the number.
6. Press NEXT to move on to the name.
The display shows Number already saved if the number is already in
the call block list. You cannot save the same number twice.
7. When the screen displays Enter name, use the dialing keys to enter
a name (up to 15 characters). Press a key repeatedly until the desired
character appears. The first character of every word is capitalized.
Press
CID or
DIR to move the cursor to the left or right.
Press 0 to add a space.
Press MUTE/DELETE or BAC�SP to erase a character.
Press and hold MUTE/DELETE to erase all characters.
Press TONE to change the next letter to upper or lower case.
8. Press SAVE to store your call block entry.
1.
2.
3.
4.
5.
•
•
•
•
•
•
•
•
•
•
Directory
Caller ID log
Intercom
Call block
BACK
S
SELECT
BACK
CALL BLOCK
Block list
Calls w/o num
BACK
S
SELECT
BACK
BLOCK LIST
Review
Add new entry
BACK
S
SELECT
BACK
To Next Page
Loading...
