108
Call block
Call block
Review call block list
Using the handset or the telephone base:
When the telephone is not in use, press MENU.
Press
CID or
DIR on the handset, or press qCALLER ID
or pDIRECTORY on the telephone base to scroll to
Call block, and then press SELECT.
Press SELECT to choose Block list.
Press SELECT again to choose Review.
Press
CID or
DIR on the handset, or press
qCALLER ID or pDIRECTORY on the telephone base
to browse through the call block entries.
NOTE: Call block list is empty. Add new entry? appears if there are no call block entries.
Save a caller ID log entry to call block list
Using the handset:
Search for the desired caller ID log entry (see Review the caller ID log on
page 99).
When the desired entry displays, press SAVE.
Press
CID or
DIR to scroll to Call block, then press SELECT.
The screen displays Edit number. Use the dialing keys to edit the number,
when necessary.
Press
CID or
DIR to move the cursor to the left or right.
Press MUTE/DELETE or BAC�SP to backspace and erase a digit.
Press and hold MUTE/DELETE to erase the entire entry.
Press and hold REDIAL/PAUSE to insert a three-second dialing pause (a
p appears).
5. Press NEXT to move to the name. The screen displays Edit name.
6. Use the dialing keys to add or edit the name.
Press
CID or
DIR to move the cursor to the left or right.
Press 0 to add a space.
Press MUTE/DELETE or BAC�SP to erase a character.
Press and hold MUTE/DELETE to erase all characters.
Press # (pound key) to move the last word to the front. For example,
Johnson Charlie becomes Charlie Johnson when you press # (pound key).
7. Press SAVE when done and the screen shows Saved.
1.
2.
3.
4.
5.
1.
2.
3.
4.
•
•
•
•
•
•
•
•
•
BLOCK LIST
Review
Add new entry
BACK
S
SELECT
BACK
BLOCK LIST
Review
Add new entry
p
q
SELECT
BACK
To Next Page
Loading...
