AT&T CLP99286 - Page 115

109
Call block
Call block
Save a caller ID log entry to call block list
Using the telephone base:
Search for the desired caller ID log entry (see Review the caller ID log on
page 99).
When the desired entry displays, press SAVE.
Press qCALLER ID or pDIRECTORY to scroll to Call block, then press SELECT.
The screen displays EDIT NUMBER. Use the dialing keys to edit the
number, when necessary.
Press qCALLER ID or pDIRECTORY to move the cursor to the left or right.
Press X/DELETE or BAC�SP to backspace and erase a digit.
Press and hold X/DELETE to erase the entire entry.
Press and hold REDIAL/PAUSE to insert a three-second dialing pause (a
p appears).
5. Press NEXT to move to the name. The screen displays EDIT NAME.
6. Use the dialing keys to add or edit the name.
Press qCALLER ID or pDIRECTORY to move the cursor to the left or right.
Press 0 to add a space.
Press X/DELETE or BAC�SP to erase a character.
Press and hold X/DELETE to erase all characters.
Press # (pound key) to move the last word to the front. For example,
Johnson Charlie becomes Charlie Johnson when you press
# (pound key).
7. Press SAVE when done and the screen shows Saved.
1.
2.
3.
4.
•
•
•
•
•
•
•
•
•