AT&T CLP99286 - Delete a Call Block Entry; Block Calls Without Number; Mute First Ring of Blocked Calls

111
Call block
Call block
Delete a call block entry
Using the handset or the telephone base:
Search for the desired entry in the call block list (see Review call block
list on page 108).
When the desired entry displays, press MUTE/DELETE on the handset, or
press X/DELETE on the telephone base.
The screen shows Delete entry?. Press YES to confirm. The screen
displays Entry deleted, and then the next entry displays. You cannot
retrieve a deleted entry.
Block calls without number
You can use this feature to reject all incoming calls which are
“out of area“ or with numbers set to “Private“.
Using the handset or the telephone base:
When the telephone is in idle mode, press MENU.
Press

CID or

DIR on the handset, or press qCALLER ID or
pDIRECTORY on the telephone base to scroll to Call block,
then press SELECT.
Press

CID or

DIR on the handset, or press qCALLER ID
or pDIRECTORY on the telephone base to scroll to
Calls w/o num, then press SELECT.
Press

CID or

DIR on the handset, or press qCALLER ID or
pDIRECTORY on the telephone base to choose Block or Not block, then
press SELECT.
Mute first ring of blocked calls
An incoming call will ring once and then the system will check if the call
should be blocked. You can mute the first ring of blocked calls.
Using the handset or the telephone base:
When the telephone is in idle mode, press MENU.
Press 7464#.
Press

CID or

DIR on the handset, or press qCALLER ID or
pDIRECTORY on the telephone base to scroll to select On or
Off, then press SELECT. There is a confirmation tone.
1.
2.
3.
1.
2.
3.
4.
1.
2.
3.
CALL BLOCK
Block list
Calls w/o num
BACK S
SELECT
BACK
CALLS W/O NUM
Not Block
Block
BACK S
SELECT
BACK
MUTE FIRST RING
On
Off
BACK S
SELECT
BACK