Appendix
145
Display screen messages
Screen messages
Push to talk
Ended
The PTT session is ended.
Quiet mode on
QUIET mode is on.
Quiet mode is off
QUIET mode is turned off.
Rec mem full
The system recording time is full.
Rec mem low
The system recording time is low.
Registering...
Please wait
The handset is registering to the telephone base.
Registration
slots are full
The telephone base has the maximum of 12 handsets
registered to it.
Registration failed
The handset registration is not successful.
Remote voice
control ended.
The remote voice control operation is ended.
Ringer off
The ringer is turned off.
Ringer muted
The ringer is off temporarily while the device is ringing.
Saved
An entry has been successfully saved in the directory.
Setting up
Answering
system...
The telephone is playing voice guide.
To register HS,
see manual.
Screen display before handset registration.
Unable to call.
Try again
You try to join a call when there are already four handsets on
that call.
You try to make an outside call when another device is
transferring a call with the intercom feature.
XX Missed calls
There are new calls in the caller ID log.
XX New msgs
Displays on handset screen when you have new messages in
the answering system.
XX New messages
Displays on telephone base screen when you have new
messages in the answering system.
To Next Page
Loading...
