AT&T CLP99286 - Page 28

Bluetooth
22
Bluetooth setup
6. Press NEXT to turn on the telephone base discoverable mode. The screen
displays Set cell to search base: AT&T DECT 6.0 PIN: 0000. Promptly
turn on the Bluetooth feature of your cell phone and search for or add
new devices.
7. Once your cell phone finds your AT&T phone (AT&T DECT 6.0), press the
appropriate key on your cell phone to continue the pairing process.
Your cell phone may require a passcode. In this case, the telephone
base displays Check cellular. ENTER PASS CODE. Enter the cell phone
passcode (typically 0000) into the telephone base and press SET.
Enter the PIN of the telephone base (the default PIN is 0000) into your
cell phone to continue the pairing process, if required. The telephone
base displays Adding Cell Phone Y (Cell Phone Y represents the device
name of your cell phone).
8. When a device is successfully connected, the telephone base displays Cell
Phone Y is added and connected to base and the corresponding status
icon (
1
or
2
) displays (Cell Phone Y represents the device name of
your cell phone). The corresponding device light on the telephone base
(CELL 1 or CELL 2/HEADSET ) turns on.
If you have trouble pairing your cell phone, it may not be compatible
with your CLP99286/CLP99386/CLP99456/CLP99486/CLP99546/
CLP99556/CLP99586. Check the Bluetooth compatibility list at
www.telephones.att.com/bluetooth.
NOTES:
The pairing process may take up to one minute. If the pairing process fails, try again.
The steps for the pairing process may vary for different cell phones. If this happens, follow
the prompts on your cell phone and your CLP99286/CLP99386/CLP99456/CLP99486/
CLP99546/CLP99556/CLP99586 to complete the pairing process.
Refer to the user’s manual of your cell phone on how to search for or add a new
Bluetooth device.
•
•
•
•
•