Answering system
About the answering system
Voice prompts
The system provides voice prompts to guide you through the setup procedures
at the telephone base, message playback, remote access and recording
outgoing announcements.
Call screening
To screen a call at the telephone base:
If the answering system and call screening are on (see Call screening on
page 106), the announcement and the incoming message broadcast at the
telephone base when a call is answered by the answering system.
Options while a message is being recorded:
Press q/VOLUME/p on the telephone base to adjust the call
screening volume.
Press /PLAY/STOP or SILENCE to temporarily silence the
call screening.
Press /PLAY/STOP or SCREEN to temporarily turn on the call screening
if call screening is set to off.
Press HOME to answer the call.
To screen a call at the handset:
If the answering system is on and your answering system is recording a
message, press SCREEN to screen the call on your handset and the screen
displays the caller ID information. If you do not subscribe to caller ID service,
the handset shows Home Incoming call.
Options while a message is being recorded:
Press qCID/VOLUME or pDIR/VOLUME on the handset to adjust the call
screening volume.
Press OFF/CANCEL or SILENCE to temporarily silence the call screening.
Press SCREEN to temporarily turn on the call screening if call screening is
set to off.
Press /SPEA�ERSPEA�ER to broadcast the announcement and the incoming
message through the speakerphone. Press again to turn off the speakerphone.
•
•
•
•
•
•
•
•
114
To Next Page
Loading...
Need help?
General
