AT&T CLP99553 User Manual

Bluetooth
Bluetooth setup
Add a headset
Before you begin, make sure that your Bluetooth enabled headset is not
connected to any other Bluetooth device. Refer to your headset user’s
manual to learn how to search for or add new Bluetooth devices.
To pair and connect a headset:
1. Press MENU on the telephone base in idle mode to
enter the main menu.
2. Press qCALLER ID or pDIRECTORY to highlight
Bluetooth, then press SELECT.
3. Press SELECT to choose Add device.
4. Press qCALLER ID or pDIRECTORY to highlight Add
headset, then press SELECT. The screen displays
If headset is connected to cell, please disconnect it.
If there are already 4 paired devices on the device
list, the 4th device on the device list will be
automatically removed, regardless of whether the
new device pairing is successful or not.
If there is another headset already active, the screen
will show Only the BT headset in slot 2 can be ready
for connection and then Headset X is deactivated
for adding a new device.
5. Press NEXT. The screen displays Pls set headset to
discoverable mode. Set your headset to discoverable
mode (refer to the user’s manual of your headset),
then press NEXT.
All devices that are connected to the telephone
base are temporarily disconnected.
6. The screen displays Searching for Bluetooth
headsets....
•
•
•
Diretory
Caller ID log
Intercom
Bluetooth
p
q
SELECT
BACK
BLUETOOTH
Add device
Device list
Download dir
p
q
SELECT
BACK
ADD DEVICE
Add cellular
Add headset
p
q
BACK SELECT
Pls set headset
to discoverable
mode
NEXT
BACK
Searching
for Bluetooth
headsets...
FOUND DEVICES
Headset A
Headset B
BACK SELECT
22

AT&T CLP99553 Specifications

General

Brand	AT&T
Model	CLP99553
Category	Cordless Telephone
Language	English