Multiple handset use
Intercom
Use the intercom feature for conversations between two handsets, or a
handset and the telephone base. You can buy additional expansion handsets
(model AT&T CLP99003) for this telephone base to expand your telephone
system (up to 12 handsets).
Using a cordless handset:
1. Press MENU in idle mode to enter the main menu. Press
qCID or pDIR to scroll to Intercom, then press SELECT.
If you have one handset, the handset shows Calling base.
If you have more than one handset, the handset shows
INTERCOM TO: Use the dialing keys to eenter a specific
device number (0 for the telephone base, 1-9 for handsets
1-9, TONE followed by 0-2 for handsets 10-12, or
TONE followed by
#
for all devices), or press qCID or
pDIR to scroll to the desired device and press SELECT.
Your handset screen shows Calling HANDSET X,
Calling BASE 0 or Calling all.
The destination device(s) rings and shows HANDSET X is
calling or HANDSET X is calling all (HANDSET represents the handset
name, X represents the handset number).
2. To answer the intercom call, press HOME/FLASH, /SPEA�ERSPEA�ER,
CELL 1, CELL 2 or any dialing key (0-9, TONE ) on the destination
handset, or press HOME on the telephone base. Both devices now
show Intercom.
3. To end the intercom call, presses END, OFF/CANCEL, or places the
handset back in the telephone base or charger; or presses END on the
telephone base. The other party hears four beeps. Both devices display The other party hears four beeps. Both devices display
Intercom ended.
•
•
68
SELECT
Answering sys
Directory
Caller ID log
Intercom
BACK
S
BACK
BACK
SELECT
INTERCOM TO:
BASE 0
HANDSET 2
All
CK
S
To Next Page
Loading...
Need help?
General
