Telephone operation
50
Make, answer and end a call
Make, answer or end a cell call
The CLP99183/CLP99283/CLP99353/CLP99383/CLP99453/CLP99483/
CLP99553/CLP99583 can be used to make or answer calls on the cell
line. You can connect a maximum of 4 Bluetooth enabled cell phones to the
telephone base. Both cell phones can be used on cell calls at the same time.
Using a cordless handset:
To make a cell call:
Press CELL 1 or CELL 2. Enter the telephone number, then press DIAL.
To predial a cell call:
Enter the telephone number, then press CELL 1 or CELL 2.
To answer a cell call:
Press HOME/FLASH or /SPEA�ER, CELL 1, CELL 2 or any dialing
key (0-9 or TONE ).
To end a cell call:
Press OFF/CANCEL, or put the handset in the telephone base or charger.
Using the telephone base:
To make a cell call:
1. Press CELL 1 or CELL 2, then enter the telephone number.
2. Press DIAL.
To predial a cell call:
Enter the telephone number, then press CELL 1 or CELL 2.
To answer a cell call:
Press HOME, CELL 1, CELL 2 or any dialing key (0-9 or TONE ).
To end a cell call:
Press CELL 1 or CELL 2.
NOTES:
You can also use your cell phone to answer the call. If you answer with your cell phone, it
disconnects from the telephone base.
If you do not want to answer the call, press REJECT .
When you try to make a cell call but your cell phone is not connected to the base, the telephone
base displays Cellular phone not connected. Please connect to proceed. Press CONNECT
to connect your cell phone to the telephone system. Refer to Bluetooth connection from idle
mode on page 24 and Connect/disconnect an active device on page 25.
•
•
•
•
•
•
•
•
•
To Next Page
Loading...
Need help?
General
