AT&T CLP99553 User Manual

Telephone settings
44
Handset and telephone base settings
Cell area code
Most cell phone entries are stored in a 10-digit format. If all of your cell
phone entries are stored this way, you do not need to program your cell
area code.
If your cell phone stores entries in a 7-digit format, we recommend that you
program your cell area code so that your 7-digit directory entries can be
dialed correctly using your home line.
To set the cell area code:
Press MENU on the handset in idle mode to enter the
main menu.
Press CID or DIR on the handset, or press
qCALLER ID or pDIRECTORY on the telephone base to
highlight Directory, then press SELECT .
Press CID or DIR on the handset, or press
qCALLER ID or pDIRECTORY on the telephone base to
highlight the desired downloaded directory, then press
OPTION .
4. Press qCID or pDIR on the handset to scroll to Cell
areacode, then press SELECT. The screen briefly shows
Only for 7 digit dial from CID.
-OR-
Press qCALLER ID or pDIRECTORY on the telephone base to scroll to Cell
area code, then press SELECT. The screen briefly shows Only for 7 digits
dialing from Caller ID log.
5. Use the dialing keys to enter the desired cell area code.
Press MUTE/DELETE on the handset, or X/DELETE on the telephone
base to erase a digit.
Press and hold MUTE/DELETE on the handset, or X/DELETE on the
telephone base to erase all digits.
6. Press SAVE to confirm. There is a confirmation tone. The handset screen
shows Areacode will not show in CID and the telephone base screen
shows Area code will not show in Caller ID log briefly before returning to
the previous menu.
1.
2.
3.
•
•
CELL AREA CODE
- - -
SAVE
BACKSP
CELL AREACODE
- - -
SAVE
BACKSP

AT&T CLP99553 Specifications

General

Brand	AT&T
Model	CLP99553
Category	Cordless Telephone
Language	English