Answering system
Message playback
When messages are playing on the handset:
Press qCID/VOLUME or pDIR/VOLUME to adjust the message
playback volume.
Press S�IP to skip to the next message.
Press REPEAT to repeat the message. Press REPEAT twice to listen to the
previous message.
Press MUTE/DELETE to delete the message.
Press 2 to pause the playback and show the caller ID information.
Press HOME/FLASH, CALL or /SPEA�ER to use the home line, or
press CELL 1 or CELL 2 to use the cell line to call back the caller.
If necessary, press # (pound key) or 1 to show different dialing options.
Press OFF/CANCEL or BAC� to restart the playback. If you do not
call back within 10 seconds, message playback restarts.
Press HOME/FLASH or CELL 1 or CELL 2 to pause the message
playback. The telephone base screen displays Call back? with the caller
ID information. Press CALL to call back the caller, or BAC� to restart the
message playback. If the dialing format used is not correct, then use the
option above to choose the correct dialing format before calling back
the caller.
Press OFF/CANCEL to stop the playback.
•
•
•
•
•
–
–
•
•
118
To Next Page
Loading...
Need help?
General
