AT&T DLP73290 - Page 139

132
Smart call blocker
Call block settings
Play your current screening announcement:
Using a cordless handset:
1. Press CALL BLOCK when the telephone is not in use.
2. Press qCID or pDIR to scroll to Screening annc, then press MENU/SELECT.
3. Press MENU/SELECT to select SCB annc type.
4. Press MENU/SELECT again to select Unknown caller. The announcement
plays automatically.
Using the telephone base:
1. Press Menu sokey, and choose Smart call blocker .
2. Press Screening annc .
3. Press Play on either Unknown Caller Annc or Robocalls only Annc.
The current announcement plays automatically. Press Stop to stop the
playback.
Record your name for screening announcements for Unknown callers or
Robocalls:
Using a cordless handset:
1. Press CALL BLOCK when the telephone is not in use.
2. Press qCID or pDIR to scroll to Screening annc, then press MENU/SELECT.
3. Press qCID or pDIR to scroll to Rec your name, then press MENU/SELECT. The
system announces, “Record after the tone. Press 5 when you are done.”
4. Speak towards the handset to record your name. Press 5 to end recording.
Using the telephone base:
1. Press Menu sokey, and choose Smart call blocker .
2. Press Screening annc .