AT&T DLP73290 - Screen unknown callers

133
Smart call blocker
Call block settings
3. Press Annc Type to choose between Unknown caller and
Robocalls only .
UNKNOWN CALLER ANNC
Play
Annc Type
Record
Default
ROBOCALLS ONLY ANNC
Play
Annc Type
Record
Default
4. Press Record to record your announcement. The system announces,
“Record after the tone. Press 5 when you are done.”
Reset all your screening announcements:
Using a cordless handset:
1. Press CALL BLOCK when the telephone is not in use.
2. Press qCID or pDIR to scroll to Screening annc, then press MENU/SELECT.
3. Press qCID or pDIR to scroll to Reset SCB annc, then press MENU/SELECT.
The screen shows Reset annc?. Press MENU/SELECT again to conrm. The
screen shows Annc reset. before returning to the previous menu.
Using the telephone base:
1. Press Menu sokey, and choose Smart call blocker .
2. Press Screening annc .
3. Press Annc Type to choose between Unknown caller and
Robocalls only .
UNKNOWN CALLER ANNC
Play
Annc Type
Record
Default
ROBOCALLS ONLY ANNC
Play
Annc Type
Record
Default