AT&T GL210 User Manual

49
Call block
Call block settings
Add a call block list entry
1. Press MENU/SELECT in idle mode.
2. Press CID or DIR to highlight Call block, then press MENU/SELECT .
3. Press MENU/SELECT to choose Block list .
4. Press CID or DIR to highlight Add new entry, then press MENU/SELECT .
5. When the screen shows Enter number, use the dialing keys to enter a
telephone number (up to 30 digits).
f Press CID or DIR to move the cursor to the le or right.
f Press DELETE to erase a digit.
f Press and hold DELETE to erase all digits.
f Press and hold PAUSE to insert a three-second dialing pause
(a P appears).
-OR-
Press REDIAL to copy a number from the redial list. Press CID or DIR , or
press REDIAL repeatedly to locate the desired number. Press
MENU/SELECT to copy the displayed number.
6. Press MENU/SELECT to move on to the name.
7. Use the dialing keys to enter a name (up to 15 characters) when prompted.
Press a key repeatedly until the desired character shows on the screen.
f Press CID or DIR to move the cursor to the le or right.
f Press 0 to add a space.
f Press DELETE to erase a character.
f Press and hold DELETE to erase all characters.
8. Press MENU/SELECT to store your block list entry.

AT&T GL210 Specifications

General

Brand	AT&T
Model	GL210
Category	IP Phone
Language	English