AT&T MS2015 - Introduction

4
This AT&T MS2015 deskset is not a stand-alone telephone. You must
purchase the MS2085 console and register this telephone to the console
before use. This system is not compatible with any other AT&T 4-line small
business telephones, except for the MS2085 console and MS2025 handset.
The MS2015 deskset is hearing-aid compatible and can be connected to the
console via a router. This telephone features a speakerphone for handsfree
use and a headset jack compatible with most two-band 2.5mm corded
headsets (sold separately).
There are two network jacks, known as the Ethernet jack and PC jack, at the
back of the deskset The Ethernet jack allows the MS2015 deskset to
connect with the MS2085 console via a router. The PC jack is for another
device such as a personal computer to connect to the Ethernet network
through this deskset.
The MS2015 deskset supports intercom and call transfers between
system extensions and is capable of connecting five parties on the same
conference call.
This telephone also features a 32-number one- and two-touch memory for
faster dialing and has a directory that can store up to 50 additional numbers
with names. This telephone has a caller ID feature that supports caller ID
with call waiting service. Caller ID services are subscriber services available
from many telephone service providers for a fee. The telephone can store up
to 200 caller ID entries.
Your MS2015 deskset also features a built-in digital answering system with
a private mailbox. You can access the private mailbox from a non-system
touch-tone telephone. For details, see the Answering system operation
section (pages 72-73). This user’s manual contains detailed instructions for
using your MS2015 deskset. Please read this user’s manual before using
this telephone.
Getting started
Introduction