AT&T MS2015 - PC Jack

16
You can connect your computer to the Ethernet network through the
PC jack (
Use only
Supplied
Adapter
L4 L3/4 L2 L1/2
5.1
MS2085 Engraving:
MS2015 Engraving:
Use only
Supplied
Adapter
) of this deskset. Plug one end of the Ethernet cable into the
PC jack at the back of the deskset and the other end into the Ethernet
port of your computer.
NOTES:
The PC jack does not function when there is no power connected to this deskset.
This telephone system does not support Power over Ethernet (PoE).
If you are using the Gigabit system, the connection speed of your computer drops to 100M.
•
•
•
Getting started
PC jack
PC jack
Use only
Supplied
Adapter