58
Copy a directory entry to one touch
When a directory entry appears, press MENU/SELECT.
Press or to choose Copy to 1-touch, then press MENU/SELECT.
The screen displays Enter Number. Use the dialing
keys to edit the number.
Press DELETE to delete a digit.
Press /REPEAT or /SKIP to move the cursor to
the left or right.
You can include a pause while storing a dialing
sequence that requires one during actual dialing.
Press or to choose Add pause, then press
MENU/SELECT. A P appears on the screen.
Store a signal for switching to temporary tone
signaling. If you have dial pulse (rotary) service,
this signal is required for some special services.
Press or to choose Send tone, then press MENU/SELECT.
A T appears on the screen. All numbers you enter after this will send
touch-tone signals during dialing.
You can store the flash signal required by some special services as part
of a dialing sequence. Press or to choose Add flash, then press
MENU/SELECT. An F appears on the screen. Continue storing the number
as usual.
Press or to scroll to Done, then press MENU/SELECT.
The deskset displays Press a 1-touch key to save the number.
Press the one-touch button for the destination party in the
upper location.
-OR-
Press LOWER, then press the one-touch button for the destination party in
the lower location.
The deskset displays Number saved to 1-touch key.
1.
2.
3.
•
•
•
•
•
4.
5.
•
•
6.
Directory
Dial, delete or edit entries
Christine Smith
Edit
>Copy to 1-touch
Delete
32/50
Enter Number
8002223111_
Select to:
Done
To Next Page
Loading...
