67
Announcement
An announcement plays when calls are answered by the private mailbox. The
system has a default announcement, “Hello, please leave a message after
the tone.” You can use this announcement or record your own.
You can record an announcement up to 75 seconds.
To record the announcement:
When the deskset is idle, press ANS SYS.
Press or to scroll to Private Mailbox, then
press MENU/SELECT or /SKIP.
Press or to scroll to Announcement, then press
MENU/SELECT or /SKIP.
Press or to scroll to Record, then press
MENU/SELECT or /SKIP.
Facing the deskset, record your announcement.
The screen displays Record OGM and the time
elapsed. Press MENU/SELECT to select STOP to
stop recording.
NOTE: Announcements shorter than two seconds are
not recorded.
To play the announcement:
When the deskset is idle, press ANS SYS.
Press or to scroll to Private Mailbox, then
press MENU/SELECT or /SKIP.
Press or to scroll to Announcement, then press MENU/SELECT or
/SKIP.
Press or to scroll to Play, then press
MENU/SELECT or /SKIP.
The screen displays Play OGM and the time elapsed. Press /REPEAT or
/SKIP to choose STOP, then press MENU/SELECT to stop the playback.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
Answering system
Private mailbox setup
Private Mailbox
Priv MB ON/OFF
Priv MB Delay
>Announcement
Announcement
Play
>Record
Reset
Record OGM
00:15
Select to:
STOP
Announcement
>Play
Record
Reset
To Next Page
Loading...
