Synapse Installation Guide Back to Contents
Troubleshooting 104
Initial Installation
The device screen displays Synchronizing.
Probable Cause Corrective Action
The device has previous data
and settings that are now
inconsistent with current
system settings.
Erase all Deskset data and settings by unplugging
the LAN cable and pressing the reset button on
the bottom of the Deskset for more than five
seconds.
The Ethernet cable may be connecting the
Network port on the bottom of the Deskset,
marked , to another system device, rather
than to the Network. Make sure the Ethernet
cable is attached to the LAN.
To Next Page
Loading...
