Synapse Installation Guide Back to Contents
Installation 24
In this configuration, you can specify a paging delay on the WebUI to compensate for the
fixed delay introduced by the OHP system. This delay ensures that the paging tone is
played simultaneously on both Desksets and on the OHP system.
Figure 6. Single-Zone Overhead Paging on FXS Port
Multi-Zone Paging
Multi-zone paging broadcasts to speakers grouped into separate zones. Since the
multi-zone OHP systems require zone selection, they cannot be combined into one zone
together with Synapse Desksets. A multi-zone paging system must connect to one of the
ATA FXS ports.
When paging is configured as a multi-zone OHP, a dedicated Overhead Paging zone
automatically appears as the last entry in the Deskset paging menu.
Figure 7. Multiple-Zone Overhead Paging on FXS Port
Overhead paging cannot be added to Synapse-specific paging zones because
the multi-zone OHP cannot be paged together with Desksets.
To Next Page
Loading...
