AT&T SB67010 PSTN - Set;Edit Static IP

Synapse Installation Guide Back to Contents
Getting Started 72
To set the IP Configuration:
1. From the SB67020/025 Deskset IP Settings menu, press 1 to select
IP Configuration.
From the SB67030/031 Deskset IP Settings menu, go to Step 2.
2. Press
 or  to select Auto or Static.
3. Press to accept the changes and return to the Admin Settings menu.
Set/Edit Static IP
If your business requires a static IP address, contact your network administrator.
To set and edit static IP Address:
1. Access the Admin Settings menu:
a. Press MENU, and then press 3 on the dial pad.
b. Enter the Admin password, and then press SELECT.
2. Press 3 on the dial pad to display the IP Settings screen.
3. Press 2. The Set/Edit Static IP screen appears.
4. Enter digits. There is a 12-digit limit on the number field (not including dots).
 On the SB67030/031 Deskset, press the pound key (#) to insert a dot.
On the SB67020/025 Deskset, press to insert a dot.
Quick
Dial
2. Set/Edit Static IP
Save
IP Settings
3. IP Status
1. IP Configuration Auto
Use or to move highlight.
Use or to cy cle through options.
IP Configuration
Set IP to: Auto
Save
030/031 Deskset IP Configuration 020/025 Deskset IP Configuration
Save
Quick
Dial
Save
Static IP Edit
IP Address:
Subnet Mask:
Gatew ay:
DNS Server :
Backspc
Use dial pad to enter digits and press #
to enter a dot.
Set/Edit Static IP
IP Address:
Subne t M as k:
Save Backspc"."
030/031 Deskset Set/Edit Static IP
020/025 Deskset Set/Edit Static IP
"."