Synapse Installation Guide Back to Contents
Installation 38
Figure 22. Deskset Stand Installation
5. Rotate the stand away from you until it rests against the base and you hear a click
as the flexible tabs lock into place.
To rotate the handset tab for wall and Deskset Option 2 installation:
1. Press the switch hook and slide the handset tab toward the top of the base, as
shown.
2. Rotate the handset tab 180° so that the “hook” is at the top.
3. Slide the handset tab back into the base.
Flexible tabs
Flexible tabs
Solid tabs
Solid tabs
Option 1
Option 2
To Next Page
Loading...
