AT&T TL7601 - Basic Operation

Remote dial pad operation
Basic operation
Make a call
To make a call:
• Press ON/OFF on the headset to turn on the
headset, then enter the telephone number on
the dial pad, and press CALL/FLASH on the
remote dial pad.
-OR-
• Press
ON/OFF on the headset to turn on the
headset, then press CALL/FLASH on the
remote dial pad, and enter the telephone
number on the dial pad.
To end a call:
• Press
OFF/CLEAR on the remote dial pad.
-OR-
• Press
ON/OFF on the headset.
On-hook dialing (predialing)
1. Enter the telephone number. Press
OFF/CLEAR or DELETE to delete any
unwanted digits.
2. Press
CALL/FLASH to dial the displayed
number.
PHONE 0:00:30
1-234-5678
1
Elapsed
time
ENDED 0:00:30
1-234-5678
1
UNABLE TO CALL
TRY AGAIN
1
11
NOTE: The screen displays the elapsed time of your
telephone conversation (in hours, minutes and seconds).
NOTES:
1.
If it cannot complete the call, the dial pad screen displays
UNABLE TO CALL TRY AGAIN.
2. If you press
CALL/FLASH before entering numbers, the dial
pad screen displays ENTER TEL# THEN PRESS CALL.
ENTER TEL#
THEN PRESS CALL
1