To Next Page

To Previous Page

Handset settings

Home area code

If you dial seven digits to make a local call (no

area code required), program your area code

into the telephone as the home area code. After

setting, if you receive a call from within your

home area code, the caller ID history will only

display the seven digits of the telephone number.

1. Press MENU/SELECT in the idle mode to enter

the handset main menu.

2. Use

DIR / CID

to scroll to

>HOME AREA CODE, then press MENU/SELECT.

3. Press the dial pad keys to enter a three-digit

home area code. Press DELETE/MUTE to delete

digit while entering.

4. Press MENU/SELECT to save and return to the

main menu.

NOTE: If, in the future, your telephone service provider

requires you to dial 10 digits to make a local call (area

code + phone number), re-program the home area code

by following the steps above. With the home area code

displayed, press and hold DELETE/MUTE to remove the

contents. The home area code will now be restored to its

default setting of

_ _ _

AT&T TL92328 User Manual

Questions and Answers: