37
Telephone operation
Call transfer using intercom
Use the intercom feature to transfer an outside
call to another system handset.
Model TL92278 (two-handset system)
1. When on an outside call, press MENU/SELECT to
enter the feature menu.
2. Use DIR / CID to scroll to >TRANSFER,
then press MENU/SELECT. The outside call is
automatically placed on hold. The transferring
handset’s screen will show CALLING OTHER
HANDSET. The called handset will ring, and
its screen will show OTHER HANDSET IS
CALLING.
3. On the ringing handset, press HOME/FLASH
or SPEAKER to answer the intercom call. You
can now talk without the outside caller hearing
the conversation.
4. Press OFF/CLEAR on the transferring
handset or place it in the telephone base or
handset charger to complete the transfer. The
transferring handset’s screen will show CALL
TRANSFERED and the other handset will
automatically be connected to the outside call.
-OR-
Press HOME/FLASH or CELLULAR
(depending on which call is being transferred)
on the called handset to let both parties
conference with the external line.
NOTES:
1. Before the intercom call
is answered, press and
hold OFF/CLEAR to
cancel the transfer and
return to the outside call.
2. If the called handset does
not answer the intercom
call within 100 seconds,
is in directory or caller ID
history mode, or is out
of range, the transferring
handset will show
UNABLE TO CALL TRY
AGAIN on its screen and
will automatically return
to the outside call.
3. You can end the intercom
call and return to the
outside call by pressing
HOME/FLASH or
CELLULAR (depending
on which call is being
transferred) on the
transferring handset, or
pressing OFF/CLEAR on
the called handset.
To Next Page
Loading...
Need help?
General
