AT&T TL92328 - Handset Operation

To Next Page

To Previous Page

Telephone operation

Handset operation

Handset locator

The handset locator feature is useful if you misplace

a handset(s).

To start the paging tone:

• Press HANDSET LOCATOR at the telephone

base. This starts the paging tone on the handset(s)

for 60 seconds.

NOTE: When paging, if you press OFF/CLEAR or

DELETE/MUTE on a handset, the ringer of the handset will

be silent but the handset locator feature will not be

canceled.

To stop the paging tone:

• Press HOME/FLASH, SPEAKER, or any dial

pad key (0-9, *, or #) on the handset(s),

–OR–

• Press HANDSET LOCATOR on the telephone

base.

NOTE: The handset ringer volume also determines the level

of the paging tone. If the handset ringer volume level is set

to off, that handset will be silent for all calls and paging

(page 20).

**PAGING**

Main Page

AT&T TL92328 - Handset Operation - Handset Locator