© 2013 AT&T Intellectual Property. All rights reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property.
Page 9 of 16
Screen elements include the following:
Done button: This button should be disabled until all code input fields are
populated.
On tap, display an Adding Receiver Overlay screen.
Back button:
On tap, display a My U-verse Receivers screen shown in Figure 2-2.
Instructional text and graphics: Display step-by-step instructions as shown.
The receiver name in Step 1 should be updated to reflect the name of the
receiver that is being added.
Code Input fields: Display four input boxes for the PIN code. Characters
entered in the keyboard will be displayed in the field, as shown below. As a
character is entered in a field, the cursor will automatically advance to the
next field (standard behavior).
If the user taps the Delete key, clear out the last character entered.
Numeric keyboard: Display standard OS numeric keyboard.
To Next Page
Loading...
