Atari CX - Page 117

79 If this test fails:
a)
Replace the pots if they have not already been replaced.
b)
Replace the actuator plates if the pots have already been replaced.
NOTE:
The actuator plates must be replaced as a complete unit which
indudes the two actuator plates and the slide block (see Figure 6-51.
C) 3pening for Pot
Arm !
Slide alock
Actuator Plates
- I
-
- Opening for Pot
u Arm2
Slide alock
Actuator Plates
- I
-
u
- Opening for Pot
Arm 2
Figure 6-5. Controller Top (Underside)
CX5200 Field Service Manual
Changed
by
ECN /I0036
6/21 /83