Atari CX - Page 174

Consumer Product Service
Manager of Tehnical Support -
TECH TIP
number 5
I MODEL:
CX2800
Switch Shorting
DEScrnON:
The Rev. 4 CX2800PCB switch S1 (OnlOff) has a metal standoff that may shoe to the
trace beneath the switch. To prevent shorting, place a small piece of insulating tape
on the board beneath the switch.
PCB to Rev. 4 and above have the traces rerouted.
DIFFICULN REPORTING;
If you need further darification concerning this Tech Tip, call the ATARI Tech-Line
Specialist:
Inside California
(800) 672-1 466
Outside California
(800) 538-1535
Metal Standoff