ATCOM CT1X - Starting

CT1X IP Phone User Manual
ATCOM TECHNOLOGY CO., LIMITE
www.atcom.cn
14
LED Status
Frequency
Description
Red
-
Mute
OFF
-
Unmute
3. Voicemail indicator
LED Status
Frequency
Description
Red/Flash
500ms on/500ms off
New message
Red/Flash
250ms on/250ms off
Call ringing
Red
-
Normal working
OFF
-
No new message
4. Call indicator
LED Status
Frequency
Description
Red
-
In a conversation
Red/Flash
500ms on/500ms off
On-hold
OFF
-
Idle state
When boot up, all indicators will be lighted once.
When phone is stand by, all the indicators are off, WMI indicator will be lighted when the
phone is working.
When updating firmware, all indicators will be flash in frequence 1s on/ 1s off.
2.2. Starting
When start on the phone, it turns to standby status in about 50 seconds.