A2X(W)/A20LTE IP Phone User Manual
ATCOM TECHNOLOGY CO., LIMITEwww.atcom.cn45
e phone number monitored for pickup
Reminding：This code must be set for pickup, and this code can be set via Web only.
Set the Pickup code as follow：
Set the pickup code for one single Account: Account→Advanced→Select an account to be
configured→Directed Call Pickup Code.
Set the pickup code for all Accounts：Phone→Features→Call Pickup→Direct Call Pickup.
Direct Call Pickup Code（Direct Call Pickup should be set as Enable）.
Call Park
Press this key while on calling, the phone will dial the specified phone number, user will
receive a code on the phone prompt, and then press the soft key “Transfer”, the current calling
will be parked successfully. At this moment, user is able to continue the parked calling with
any other phones which registered on the same SIP server by dialing the code which user
have received.
The code for pickup the parked
and it is provided by SIP server.
DTMF
Press this key while on calling, the phone will send the configured “Value” automatically.
The value sent to remote end while on calling.
To Next Page
Loading...
Need help?
General
