ATCOM CT1X User Manual

A2X(W)/A20LTE IP Phone User Manual
ATCOM TECHNOLOGY CO., LIMITEwww.atcom.cn28
Soft Keys
Press to select a function whichdisplayedat the softkey zone of
screen
Display all optional functions at the last line of LCD screen.
Status Indicator
LED
Indicates
the phone’
s
status,
 If the phone is being started ,the LED is on
 If the phone is standby, the LED is off
 If there is income calling, the LED will blink at 120ms on,
120ms off.
 If there is a new message, the LED will blink at 600ms on,
600ms off.
LCD Screen
All information such as date, time, phone number, incoming
caller’s ID(if available),line/call status, extension numbers and the
soft key features are displayed on it.
Dial pad
Entering numbers or characters.
Line Key
Shows extension number and status.
Navigation keys
Allows users to navigate(left, right, up, down).Press can enter
“Directory”. Press can enter “History”.
Adjust the volume(speaker/handset/headset/ring). Volume level
will bedisplayed on LCD when pressing volume key.
Confirm users’ operation
and
show status when A2X(W) is idle.
Cancel users’ operation.
Enter menu settings
.
Pick up and hung up
under
the speaker mode
.
Mute the mic in a conversation by pressing the Mute button; this
prevents the person on the active call from hearing what you or
someone else in the room is saying.
To un-mute, press the Mute button again.

ATCOM CT1X Specifications

General

Brand	ATCOM
Model	CT1X
Category	IP Phone
Language	English