11
3.1. SAFETY INFORMATION
The symbols shown hereunder are necessary to be read with special attention.
Not reading or observing of them may cause damage to the equipment or personal injury.
The IMPORTANT symbol above is one telling to apply special care and to be careful at carrying out the specified
operation.
The CAUTION! symbol above warns you against specific dangers and requires to read the text. Not observing
may cause damage to the equipment.
The above symbol DANGER WARNING, warns you against specific dangers and you have definitely to read
them. Negligence may cause damage to the equipment and bodily injury. Read the user’s manual carefully before
using the machine or carrying out maintenance works.
3.2. ACCIDENT PRECENTION
3.2.1. Our machines are manufactured in accordance with EN 60204–1 and EN 292–2 CE safety directives, which
cover national and international safety directives.
3.2.2. It is the task of the employer to warn his staff against risks, to train them on prevention of accident, to provide
for necessary safety equipment and devices for he operator’s safety.
3.2.3. Before starting to work with the machine, the operator should check the features of the machine, learn all
details of the machine’s operation.
3.2.4. Machine should be operated only by staff members, who have read and understood the contents of this
manual.
3.2.5. All directives, recommendations and general safety rules contained in this manual have to be observed fully.
The machine cannot be operated in any way for purposes other than those described herein. Otherwise, the
manufacturer shall not be deemed responsible for any damages or injuries. And such circumstances would
lead to the termination of the warranty.
3.3. GENERAL SAFETY INFORMATION
3.3.1. The power cable should be led in such a way that nobody can step on it or nothing can be placed on it.
Special care be taken regarding the inlet and outlet sockets.
3.3.2. If the power cable should be damage during operation, don’t touch and unplug it. Never use damaged power
cables.
3.3.3. Don’t overload machines for drilling and cutting. Your machine will operate more safely with power supply
in accordan CE with the stipulated values.
3.3.4. Don’t place your hands between parts in motion.
3.3.5. Use prtective eye glasses and ear plugs. Don’t wear oversize clothes and jewels. These can be caught by
moving.
3.3.6. Keep your working place always clean, dry and tidy for accident prevention and safe operation.
3.3.7. Use correct illumination for the safety of the operator. (ISO 8995-89 Standard The Lighting of Indoor Work
System)
3.3.8. Don’t leave anything on the machine.
3.3.9. Don’t use any materials other than those recommended by the monufacturer for cutting operations on the
machine.
3.3.10. Ensure that the work piece is clamped appropriately by the machine’s clamp or vice.
3.3.11. Ensure safe working position, always keep your balance.
3.3.12. Keep your machine always clean for safe operation. Follow the instructions at maintenance and replacement
of accessories. Check the plug and cable regularly. If damaged, let it replace by a qualified electrician. Keep
handles and grips free of any oil and grease.
3.3.13. Unplug first, before conducting and maintenance works.
3.3.14. Ensure that any keys or adjustment tools have been removed before operating the machine.
3.3.15. If you are required to operate the machine outside, use only appropriate extension cables.
To Next Page
Loading...
General