DIVA Quick Start, version 1.0.1
Ateïs International
Ch. du Dévent, 1024 Ecublens, Switzerland.
Phone : +41 21 881 25 10
3
1 Introduction
This document is designed to be a “Quick Start” manual and is only intended to give a rapid
overview of how to start with DIVA. To obtain more precise details on “how to” and for
further information about more complex configuration possibilities, please read the DIVA
HELPDOC or DIVA USER MANUAL available on our website.
This document is separated into two parts. The first one will lead you to obtain a quick usable
configuration. The second part, starting from the basic configuration, will show you how to
add more devices and more feature to your configuration.
2 DIVA Overview
2.1 General
The DIVA8M module unit houses: audio digital processing (DSP), a matrix, a digital message
player, a fully monitored fireman microphone, amplifiers monitoring with switchover to
backup amplifier and loudspeaker lines monitoring. It can process and route one PSSxxDT
security microphone console or up to eight cascaded PSM paging microphones and two 0 dB
audio inputs into 2 different channels (Music + Voice). Each input is fitted with volume
controls and equalizers. The two audio inputs feature contact and VOX activation (ideal when
using the cordless microphone, for example)
2.2 Audio
There are 5 audio inputs. Two are 0 dB line inputs for tuner, cd player, etc. One gain
adjustable MIC/LINE inputs for using a third 0 dB source or an external microphone. One
input for PSS or PSM microphone and one fireman microphone input. Built in DIVA8M, a
front panel fireman microphone input that is fully monitored.
There are eight monitored loudspeaker zones (A+B) feed by two amplifier channel Voice and
Music.
2.3 Connectivity
The DIVA master is designed to be networked with slave DIVA on RS485 using CAT5
cables. The DIVA master is connected to the computer upon Ethernet protocol. Third party
control can be achieved via the RS232.
2.4 System Configuration
The DIVA8M configuration is done with the DIVA Windows® based graphical design and
operating environment software. This is an all in one software with configurable option for
each DIVA’s features.
2.5 System Control
The DIVA software allows user to real-time control features like PEQs, filtering, level
adjustment. But DIVA has also been defined to be a standalone device once configured. The
front panel offers controls like, zone selection, music routing, zone attenuator knob, message
launching buttons and different indicators LED.
To Next Page
Loading...
