Need help?Do you have a question about the Ateis DIVA8M and is the answer not in the manual?
Company overview, products, development, and markets served by ATEIS.
Company contact information including phone, fax, email, and website.
DIVA8M package contents and rack mounting instructions.
Overview of DIVA8M properties: general, audio, connectivity, configuration, and control.
Warning about potential hazardous situations and personal injury.
Detailed description of the front panel components and their functions.
Detailed description of the rear panel connectors and their functions.
Description of the DIVA8S front panel features.
Description of the DIVA8S rear panel connectors.
Step-by-step guide for installing the DIVA software.
Procedure to uninstall the DIVA software.
Steps for upgrading to a new DIVA software version.
Description of the SHM 1 Fireman Microphone and its features.
Description of the PSSDT paging microphone and its capabilities.
Description of the PSM8 paging station and its extensions.
Features and connection details of the Junction Box.
Design principles for basic controls and settings on the front panel.
Design principles for software configuration and real-time control.
How events are used to associate actions with external commands.
Accessing controls and system information via the menu.
Procedure to reset the speaker line monitoring.
Procedure to log out of the current user session.
Explanation of IP addresses and how to view/set them.
Configuring network parameters like IP, Submask, and Gateway.
Assigning music sources, setting attenuation, and toggling sources.
Starting messages and making zone calls with the fireman microphone.
Displays the path of the active file and window controls.
Overview of the main menu commands.
Operations related to system files and printing.
Common editing tools like Undo, Redo, Cut, Copy, Paste, Delete.
Commands to call closed or invisible control windows and toolbars.
Managing user rights, adding users, and setting privileges.
Commands for communication, updating, and searching devices.
Libraries of elements for DIVA configuration.
Workspace for developing configurations and accessing monitors.
Displays quick status information like connection and faults.
Procedures for saving and opening project files.
Steps to create a new system project.
Setting up network parameters for communication.
Accessing and managing user accounts and privileges.
Procedure to upgrade the DIVA firmware.
Performing a device search on the network.
Storing messages into DIVA memory using the message manager.
Understanding and managing DIVA actions based on event philosophy.
Routing and controlling music sources via software or front panel.
Adding high-pass or low-pass filters to audio inputs and outputs.
Adding compressors or limiters to audio inputs and outputs.
Overview of wiring DIVA with external devices.
Controlling tone generator parameters like mute, frequency, and level.
Parameter settings for PSS microphone general properties.
Defining PSS key functions and associated actions.
Automating Mic/Line source routing based on signal presence.
Routing Mic/Line sources using external logic triggers.
Controlling and monitoring Mic/Line sources via software.
Configuring normal logic inputs and their behavior.
Using evacuation inputs as logic or monitored inputs.
Using external fault inputs to force DIVA into security mode.
Display and controls for monitoring zone impedance and parameters.
Monitoring voice and music amplifier gain and status.
Accessing and using the scheduler window for tasks.
Adding PEQ or Hi/Lo Pass filters to audio inputs.
Adding filters to amplifier outputs.
Adding PEQ filters to audio inputs.
Adjusting PEQ parameters for amplifier outputs.
Wiring the 24VDC power supply to the DIVA unit.
Connecting the Fireman Microphone to the DIVA unit.
Connecting the PSS microphone to the DIVA unit.
Connecting music sources using CINCH connections.
Connecting microphones or third music input via XLR.
Connecting amplifiers to DIVA's 0dB and 100V outputs/inputs.
Connecting speakers and adding end-of-line capacitors.
Connecting contacts or buttons to normal logic inputs.
Connecting evacuation inputs for monitored contacts.
Creating indicator LEDs using logic outputs.
Linking 100V lines between master and slave DIVA units.
Connecting the computer to DIVA via CAT5 cable or Ethernet.
RS232 communication (COMING SOON).
Connecting DIVA8S slave units to a master.
Remote Panel functionality (COMING SOON).
Creating a simple wiring for one DIVA master unit.
Controlling tone generator parameters like mute, frequency, and level.
Measuring amplifier gain using pilot tones.
Monitoring zone impedance and parameters.
Managing zone conflict by allowing lower priority events to continue.
Managing zone conflict by deactivating lower priority events.
General| Brand | Ateis |
|---|---|
| Model | DIVA8M |
| Category | Conference System |
| Language | English |
To Next Page
