• Name: Here you can specify a name by simply clicking in the box.
• Normally Close/Open: Here you can specify the behaviour of the inputs. Normally closed means
that the contact is closed in neutral position and reciprocally normally open means that the contact
is open in neutral position.
• Latch Mode: By ticking this option you will set the contact to be in latch mode. It means that you
will need on trigger to open/close the contact and one more trigger to get it back to the neutral
position.
• Event Setting: By clicking start you will be able to associate an event to this input, see this to
learn more.
8.24.2 Evacuation Inputs
Evacuation input have been design to offer monitoring on logical inputs as well as UGA mode, even
though they can be used as normal logic inputs, in order to provide an higher security level for external
trigger.
• Name: Here you can specify a name by simply clicking in the box.
Ateïs International
Ch. du Dévent, 1024 Ecublens, Switzerland.
Phone : +41 21 881 25 10
108
To Next Page
Loading...
