8.33.11 100V Outputs
The 100V outputs have been made to link the 100V line from a master DIVA to a slave DIVA. To learn
more on how to do the connection between master and slave, please read this
.
8.33.12 Computer
The computer can be directly connected to a master DIVA by using a CAT5 cable or can be
connected to a ethernet network using the same type of cable. The next two schematics are example
on how to connect masters DIVA to a computer.
Ateïs International
Ch. du Dévent, 1024 Ecublens, Switzerland.
Phone : +41 21 881 25 10
137
To Next Page
Loading...
